Training is the first step in tool safety. Initial training includes two components one of general awareness training and two, operational training. General awareness training is can be in the form of reading the information included with the tool. Operational training can be done by taking a class on the tool's use and safety factors needing to be addressed; this class should include information and operational (hands-on) training, pre-operational procedures, basic maintenance procedures, and what appropriate personal protective equipment is required.
Before using a tool:
Locate and put on necessary and appropriate personal protective equipment.
Check for loose fitting clothing and jewelry and remove if they can entangle with the use of the tool.
Look at the work area and make sure it is well lit, dry, and clean before beginning work.
Tools must be inspected prior to use to ensure that that it is in good working order. If there are defects, don't use and make the necessary repairs. Next check the guards if applicable. Tools with guards must meet these minimum general requirements:
Be secure - Removable guards are in place on the machine or equipment before use.
Prevent contact - Guards prevent any part of any employee's body and clothing from making contact with dangerous moving parts.
Protect from falling objects - Guards ensure that no objects can fall into moving parts.
If a guard is defective or damaged, the tool is defective and needs to be repaired. Do not defeat these guards.
For operation of the tool:
Always use the proper tool for the right job.
Do not remove a guard for any reason while operating tools.
Electric cables and cords must be kept clean and free from kinks.
Do not carry the tool by its cord.
All necessary personal protective equipment is worn while using the tool.
If you are distracted while using the tool, stop work with the tool.
When done with a tool, basic maintenance must be performed, for example the tool should be kept sharp, oiled, and stored properly, as appropriate.
By following these pointers, working with power tools will be safe and the tools will also have a longer.
Brent Bowlin is a health and safety researcher who has helped businesses in implementing safety programs. For help contact him at abbsafetynet@gmail.com and for safety supplies go to http://www.safetysuppliescanada.com, they deliver anywhere.
Article Source: http://EzineArticles.com/?expert=Brent_A_Bowlin
Before using a tool:
Locate and put on necessary and appropriate personal protective equipment.
Check for loose fitting clothing and jewelry and remove if they can entangle with the use of the tool.
Look at the work area and make sure it is well lit, dry, and clean before beginning work.
Tools must be inspected prior to use to ensure that that it is in good working order. If there are defects, don't use and make the necessary repairs. Next check the guards if applicable. Tools with guards must meet these minimum general requirements:
Be secure - Removable guards are in place on the machine or equipment before use.
Prevent contact - Guards prevent any part of any employee's body and clothing from making contact with dangerous moving parts.
Protect from falling objects - Guards ensure that no objects can fall into moving parts.
If a guard is defective or damaged, the tool is defective and needs to be repaired. Do not defeat these guards.
For operation of the tool:
Always use the proper tool for the right job.
Do not remove a guard for any reason while operating tools.
Electric cables and cords must be kept clean and free from kinks.
Do not carry the tool by its cord.
All necessary personal protective equipment is worn while using the tool.
If you are distracted while using the tool, stop work with the tool.
When done with a tool, basic maintenance must be performed, for example the tool should be kept sharp, oiled, and stored properly, as appropriate.
By following these pointers, working with power tools will be safe and the tools will also have a longer.
Brent Bowlin is a health and safety researcher who has helped businesses in implementing safety programs. For help contact him at abbsafetynet@gmail.com and for safety supplies go to http://www.safetysuppliescanada.com, they deliver anywhere.
Article Source: http://EzineArticles.com/?expert=Brent_A_Bowlin
Labels: Machinery Tool
0 Comments:
<< Home | << Add a comment